{"product_id":"cinestill-df-96-monobath-developer-fixer-for-black-white-film-1l","title":"CineStill DF 96 Monobath Developer \u0026 Fixer for Black \u0026 White Film 1L","description":"\u003ch3\u003eCineStill Df96 Monobath Developer \u0026amp; Fixer for Black \u0026amp; White Film 1L\u003c\/h3\u003e \u003cp\u003eCineStill Df96 Monobath makes developing black and white film at home remarkably simple by combining development and fixing into a single reusable solution. Designed for traditional black and white films including CineStill BwXX, Tri-X, HP5 and many others, Df96 requires no separate developer, stop bath or fixer. Processing can take as little as three minutes, uses standard developing tanks and reels, and can be carried out across a flexible range of room temperatures.\u003c\/p\u003e \u003ch4\u003eThe Perfect Developer For\u003c\/h4\u003e \u003cul\u003e \u003cli\u003eAnyone looking for a simple way to start developing black and white film at home.\u003c\/li\u003e \u003cli\u003eFilm photographers wanting to reduce the number of chemicals needed for processing.\u003c\/li\u003e \u003cli\u003eExperienced photographers looking for a fast and convenient black and white workflow.\u003c\/li\u003e \u003cli\u003eProcessing CineStill BwXX and other traditional cubic-grain black and white films.\u003c\/li\u003e \u003cli\u003ePhotographers wanting a reusable and economical processing solution.\u003c\/li\u003e \u003c\/ul\u003e \u003ch4\u003eKey Features\u003c\/h4\u003e \u003cul\u003e \u003cli\u003eAll-in-one black and white developer and fixer.\u003c\/li\u003e \u003cli\u003eNo separate stop bath or fixer required.\u003c\/li\u003e \u003cli\u003eProcesses traditional black and white films in a single chemical bath.\u003c\/li\u003e \u003cli\u003eProcessing times from approximately 3 to 6 minutes at normal room temperatures.\u003c\/li\u003e \u003cli\u003eWorks between approximately 20°C and 28°C for standard processing.\u003c\/li\u003e \u003cli\u003eCompatible with standard developing tanks and reels.\u003c\/li\u003e \u003cli\u003eProcesses 16+ rolls of film per litre.\u003c\/li\u003e \u003cli\u003eSuitable for processing between 1 and 8 rolls at a time.\u003c\/li\u003e \u003cli\u003eReusable solution for economical home processing.\u003c\/li\u003e \u003cli\u003ePush and pull processing possible by adjusting temperature.\u003c\/li\u003e \u003cli\u003eProduces archival negatives when correctly fixed and washed.\u003c\/li\u003e \u003cli\u003eOdour-free formulation.\u003c\/li\u003e \u003c\/ul\u003e \u003ch4\u003eBlack \u0026amp; White Processing in One Bath\u003c\/h4\u003e \u003cp\u003eDf96 simplifies conventional black and white processing by combining the developer and fixer into one self-completing bath. There is no need to measure out separate developer, stop bath and fixer solutions. Once processing is complete, simply wash the film thoroughly with water before hanging it to dry.\u003c\/p\u003e \u003ch4\u003eFast and Flexible Processing\u003c\/h4\u003e \u003cp\u003eStandard processing can be completed in approximately 3 to 6 minutes depending on temperature and agitation. CineStill recommends at least 3 minutes at 27°C with constant agitation, 4 minutes at 24°C with intermittent agitation, or 6 minutes at 21°C with minimal agitation. The solution has a temperature tolerance of approximately ±1°C.\u003c\/p\u003e \u003ch4\u003eProcess a Wide Range of Black \u0026amp; White Films\u003c\/h4\u003e \u003cp\u003eDf96 can process most standard black and white films at their native ISO and was designed particularly with traditional cubic-grain emulsions such as CineStill BwXX, Kodak Tri-X and Ilford HP5 in mind. It can also process tabular-grain films such as Kodak T-Max, although these may require additional processing time to clear completely.\u003c\/p\u003e \u003cp\u003eSome tabular-grain films may initially retain pink or purple dyes after processing. This is normal and will fade. Certain specialist films can also require different exposure ratings or longer processing times, so manufacturer-specific guidance should be considered when working with unusual emulsions.\u003c\/p\u003e \u003ch4\u003ePush and Pull Processing\u003c\/h4\u003e \u003cp\u003eDevelopment can be adjusted through processing temperature, allowing Df96 to be used for push and pull processing without changing chemicals. Higher temperatures increase development and can produce greater contrast and more pronounced grain, while lower temperatures can be used for reduced contrast. CineStill recommends following the appropriate temperature and agitation instructions for the desired result.\u003c\/p\u003e \u003ch4\u003eReusable and Economical\u003c\/h4\u003e \u003cp\u003eDf96 is designed to be reused, with one litre capable of processing more than 16 rolls of film. As the chemistry is reused, CineStill recommends adding approximately 15 seconds to the processing time for each previously processed roll, up to a total processing time of eight minutes. If film has not fully cleared, it can remain in the Df96 for longer to complete fixing.\u003c\/p\u003e \u003ch4\u003eArchival Washing\u003c\/h4\u003e \u003cp\u003eFor archival results, processed film must be thoroughly washed after leaving the Df96 bath. CineStill recommends washing under running water at room temperature for approximately five minutes or using a repeated fill, inversion and drain method. A final rinse with a suitable wetting agent can also help promote even drying and reduce water marks.\u003c\/p\u003e \u003ch4\u003eStorage and Chemical Life\u003c\/h4\u003e \u003cp\u003eUnused mixed Df96 has an expected shelf life of approximately one year when stored in a tightly sealed bottle. Once the chemistry has been used, CineStill recommends reusing it within approximately two months. As the solution becomes exhausted it will progressively yellow and eventually turn dark amber. A simple daylight film-leader snip test can be used to check activity before processing an important roll.\u003c\/p\u003e \u003ch4\u003eTFC's Verdict\u003c\/h4\u003e \u003cp\u003eCineStill Df96 is one of the easiest ways to simplify black and white film development. Combining development and fixing into one reusable bath removes several stages from the traditional process, making it particularly appealing to photographers developing their first films at home or anyone who values a quick, straightforward workflow. With flexible room-temperature processing, broad film compatibility and capacity for more than 16 rolls per litre, it is also a very practical option for regular black and white shooters.\u003c\/p\u003e\u003cp\u003eMPN: 63120LIQ\u003c\/p\u003e","brand":"CineStill","offers":[{"title":"Default Title","offer_id":49179166015744,"sku":"CINE030","price":22.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0561\/2185\/2101\/files\/12969_18167_ca1e018f-be83-4c65-8bd0-92b2b9169915.jpg?v=1786613790","url":"https:\/\/theflashcentre.com\/products\/cinestill-df-96-monobath-developer-fixer-for-black-white-film-1l","provider":"The Flash Centre","version":"1.0","type":"link"}