Mon-Fri 0900 - 1730
Phottix Indra500LC Canon TTL Studio Light & Battery Pack Kit
Another Phottix First
Phottix presents the first studio light system compatible with Canon’s radio flash system. Incorporating the radio control and triggering for the Canon RT and the Phottix Laso triggering systems. The Indra500LC gives photographers 500W/s of TTL power, opening up new possibilities and allowing photographers to shoot in shutter and aperture priority modes with incredible power.
The Indra500 TTL is the perfect way to unleash creativity. Use TTL to shoot during fast paced events such as weddings. Shoot on-location, under the harsh sun and control ambient light with high speed sync. Shoot wide-open with shutter speeds up to 1/8000s.
High Speed Sync
With the Phottix Indra500LC TTL’s High Speed Sync function photographers can shoot at higher sync speeds allowing wider apertures while still being able to control ambient light. In manual mode the Indra500LC offers 8 stops of power adjustments - from full power to 1/128 in 1/3rd stop increments. With Stroboscopic Mode, the Phottix Indra can be used for special effect and creative shooting with flash frequency of 1-100HZ and flash counts of 1-100 times.
The Phottix Indra500LC TTL has the power and control of the Canon RT and Phottix Laso triggering systems built-in. Switch between TTL and Manual modes, adjust EV and manual power levels and use high speed sync, all from the Canon ST-E3, compatible Canon RT Speedlites and the Phottix Laso Transmitter - no extra hardware is needed
Supports older Canon non-RT flashes
One of the best things of the Phottix Laso Triggering system is it’s ability to incorporate older non-radio Canon flashes into your workflow. There’s no need to set aside your 580 EXII – add a Phottix Laso Receiver and have the ability to control and trigger it, and add it your other Canon RT-enabled flashes – and the Phottix Indra500 LC.
Using a Li-ion Battery Pack the Phottix Indra is the perfect on location light with recharge times of 2 seconds and 360 full-power flashes (High-Speed Mode) when fully charged. It’s small but extremely powerful, and the LED modelling bulb (approx. 4.5w) won't drain your battery. In the studio the Phottix Indra can be used with an AC adapter and can fully recharge in 1 second (AC Adapter not included).
The Battery Pack’s USB charging port allows for easy charging of smart phones or tablets. The Indra Battery Pack can also power hot shoe flashes. With cables compatible for Phottix, Canon, Nikon or Sony flashes, the battery pack offer ultra-fast flash recycle times and can fire hot shoe flashes thousands of times before needing recharge. The dual power ports of the battery pack can power two hot shoe flashes simultaneously.
The Phottix Indra500 TTL also incorporates Second Curtain Sync, Flash Bracketing, and Stroboscopic settings to unleash your creativity.
Like all Phottix products, the Indra500 TTL was designed with the input of professional photographers around the world. Powered by Phottix® Odin for Canon and Nikon.
What's In the Box?
1x Phottix Indra 500LC TTL Studio Light
1x Studio Light Reflector 5"
1x Straight Studio Light Power Cable 3.5m
1x Battery Body
1x 5000mAh Li-ion Cell
1x Battery Pack AC Charger with AC Power cable
1x Li-ion Cell Cover
1x Battery Pack Shoulder Strap
Elinchrom user? For Rotalux users we recommend purchasing the Elinchrom Rotalux Speedring for Bowens to accompany the Indra. This will allow you to mount your Rotalux with the Indra flashtube in the optimal position within the soft box. For mounting any other standard Elinchrom accessory we recommend adding the Phottix Indra Elinchrom Adapter.