Lighting

AJs Quarter Apple Box - 12" x 2" x 20" (305mm x 51mm x 508mm) Apple boxes are often a staple low-tech tool for use in any photographic and producti...

AJs Half Apple Box - 12" x 4" x 20" (305mm x 102mm x 508mm) Apple boxes are often a staple low-tech tool for use in any photographic and production...

AJs Full Apple Box - 12" x 8" x 20" (305mm x 203mm x 508mm) Apple boxes are often a staple low-tech tool for use in any photographic and production...

AJs One-Eighth Apple Box - 12" x 1" x 20" (305mm x 25mm x 508mm) Apple boxes are often a staple low-tech tool for use in any photographic and produ...

HiGlide Swivel Arm with Safety Cable (BW-2623) The HiGlide Swivel Arm allows modern lighting fixtures without a yoke and without a reversible scree...

HiGlide 2m Support Rail (Single) including End Stops (BW-2655) This Single HiGlide 2 Metre Support Rail is manufactured in the UK from structural g...

HiGlide 3 Hook Background Paper Carrier (Pair) with Rail Clamps (BW-2649) This HiGlide Triple Hook Carrier is designed to support up to three rolls...

HiGlide Short Fixing Kit for fixing to a flat ceiling (BW-2629) The HiGlide Short Fixing Kit, BW-2629 has been designed to attach HiGlide Rails to ...

HiGlide Cable Transfer Runners Set of 5 (BW-2607) The HiGlide Cable Transfer Runners are supplied in a pack of five with rubber coupler bands for e...

HiGlide Band Fixing Tool (BW-2621) The HiGlide Band Fixing Tool is a NEW all-metal design that allows you to easily fit the HiGlide Small Band Kit ...

HiGlide 100cm Drop Ceiling Support (BW-2663) The fixed-length Drop Ceiling Supports allow the rails to be fixed at the correct height for effective...

HiGlide 30cm Drop Ceiling Support (BW-2661) The fixed-length Drop Ceiling Supports allow the rails to be fixed at the correct height for effective ...

HiGlide Fixed Rail Clamp with Spigot (BW-2635) This clamp with spigot is used to attach items to the rail system that will not be required to move....

HiGlide Adaptor Spigot 5/8" (BW-2609) This 5/8th inch (16mm) Standard Spigot converts the Female end of the HiGlide Extension Tubes or Lite-Lift Pa...

HiGlide 3m Support Rails (Pair) including End Stops (BW-2600) This Pair of HiGlide 3 Metre Support Rails are manufactured in the UK from structural...

HiGlide Cable Fixing Kit Large Band Set of 10 (BW-2625) Tool set of 10 'LARGE' bands to attach mains cables to the outside of LiteLift pantographs ...

HiGlide Braked Double Carriage with Single Brake (BW-2620) The Double Carriage with a single Brake will stay locked in position and should be used ...

HiGlide Double Carriage (BW-2603) The HiGlide Double Carriage allows two rails to be attached while still allowing full movement between them. Impo...

HiGlide 4.5m Support Rails (Single) including End Stops (BW-2601/1) This Single HiGlide 4.5 Metre Support Rail is manufactured in the UK from struc...

HiGlide End Stops Set of 4 (BW-2606) A set of HiGlide Rail End Stops. Includes four end stops plus all necessary 'P' clips, nylon bumpers, nuts, an...

HiGlide 18m (60ft) Rubberised 10amp Mains cable with UK C15 Mains Plug (BW-2682) The HiGlide 18m (60ft) Rubberised 10amp Mains Cable is a high-qual...

HiGlide 3m Support Rail (Single) including End Stops (BW-2600/1) This Single HiGlide 3 Metre Support Rail is manufactured in the UK from structural...

HiGlide 3m Lite-Lift Pantograph (BW-2636) The BW-2636 HiGlide 3 metre Lite-Lift Pantograph is the backbone of our system. UK designed and manufactu...